Format Numbers and Dates
Formatting numbers with base R tools often degenerates into a major intellectual challenge for us little minds down here in the valley of tears. There are a number of options available and quite often it's hard to work out which one to use, when a more uncommon setting is needed.
The Format() function wraps all these functions and tries to offer a simpler, less technical, but still flexible interface.
There's also an easygoing interface for format templates, defined as a list consisting of any accepted format features. This enables to define templates globally and easily change or modify them later.
Format(x, digits = NULL, sci = NULL, big.mark = NULL,
ldigits = NULL, zero.form = NULL, na.form = NULL,
fmt = NULL, align = NULL, width = NULL, lang = NULL,
eps = NULL, ...)
## S3 method for class 'table'
Format(x, digits = NULL, sci = NULL, big.mark = NULL,
ldigits = NULL, zero.form = NULL, na.form = NULL,
fmt = NULL, align = NULL, width = NULL, lang = NULL,
eps = NULL, ...)
## S3 method for class 'matrix'
Format(x, digits = NULL, sci = NULL, big.mark = NULL,
ldigits = NULL, zero.form = NULL, na.form = NULL,
fmt = NULL, align = NULL, width = NULL, lang = NULL,
eps = NULL, ...)
## Default S3 method:
Format(x, digits = NULL, sci = NULL, big.mark = NULL,
ldigits = NULL, zero.form = NULL, na.form = NULL,
fmt = NULL, align = NULL, width = NULL, lang = NULL,
eps = NULL, ...)
Fmt(...)
as.fmt(...)
as.CDateFmt(fmt)x |
an atomic numerical, typically a vector of real numbers or a matrix of numerical values. Factors will be converted to strings. |
digits |
integer, the desired (fixed) number of digits after the decimal point. Unlike |
sci |
integer. The power of 10 to be set when deciding to print numeric values in exponential notation. Fixed notation will be preferred unless the number is larger than 10^scipen. If just one value is set it will be used for the left border 10^(-scipen) as well as for the right one (10^scipen). A negative and a positive value can also be set independently. Default is
|
big.mark |
character; if not empty used as mark between every 3 decimals before the decimal point. Default is "" (none). |
ldigits |
number of leading zeros. |
zero.form |
character, string specifying how zeros should be specially formatted. Useful for pretty printing 'sparse' objects.
If set to |
na.form |
character, string specifying how |
fmt |
either a format string, allowing to flexibly define special formats or an object of class |
align |
the character on whose position the strings will be aligned. Left alignment can be requested by setting |
width |
integer, the defined fixed width of the strings. |
lang |
optional value setting the language for the months and daynames. Can be either |
eps |
a numerical tolerance used mainly for formatting p values, those less than eps are formatted as " |
... |
further arguments to be passed to or from methods. |
Format() is the workhorse here and formats numbers and dates.
The argument fmt is very flexible and is used to generate a variety of different formats. When x is a date, it can take ISO-8601-date-and-time-format codes consisting of (d, m and y for day, month or year) and defining the combination of day month and year representation. Repeating the specific code defines the degree of abbreviation. The format 'yyyy-mm-dd' would yield a date as 2020-10-12.
| Date Codes | |
d |
day of the month without leading zero (1 - 31) |
dd |
day of the month with leading zero (01 - 31) |
ddd |
abbreviated name for the day of the week (e.g. Mon) in the current user's language |
dddd |
full name for the day of the week (e.g. Monday) in the current user's language |
m |
month without leading zero (1 - 12) |
mm |
month with leading zero (01 - 12) |
mmm |
abbreviated month name (e.g. Jan) in the current user's language |
mmmm |
full month name (e.g. January) in the current user's language |
y |
year without century, without leading zero (0 - 99) |
yy |
year without century, with leading zero (00 - 99) |
yyyy |
year with century. For example: 2005 |
The function as.CDateFmt() converts ISO-8601 codes into the C-format codes used in base R.
So
as.CDateFmt("yyyy mm dd") yields "%Y %m %d".
Even more variability is needed to display numeric values. For the most frequently used formats there are the following special codes available:
| Code | ||
e |
scientific | forces scientific representation of x, e.g. 3.141e-05. The number of digits, |
| alignment and zero values are further respected. | ||
eng |
engineering | forces scientific representation of x, but only with powers that are a multiple of 3. |
engabb |
engineering abbr. | same as eng, but replaces the exponential representation by codes, |
e.g. M for mega (1e6). See d.prefix. |
||
% |
percent | will divide the given number by 100 and append the %-sign (without a separator). |
p |
p-value | will wrap the function format.pval and return a p-value format. |
Use eps to define the threshold to switch to a < 000 representation. |
||
frac |
fractions | will (try to) convert numbers to fractions. So 0.1 will be displayed as 1/10. |
See fractions(). |
||
* |
significance | will produce a significance representation of a p-value consisting of * and ., |
while the breaks are set according to the used defaults e.g. in lm as |
||
[0, 0.001] = *** |
||
(0.001, 0.01] = ** |
||
(0.01, 0.05] = * |
||
(0.05, 0.1] = . |
||
| (0.1,1] = | ||
p*
|
p-value stars | will produce p-value and significance stars |
fmt can as well be an object of class fmt consisting of a list out of the arguments above.
This allows to store and manage the full format in variables or as options (in DescToolsOptions()) and use it as format template subsequently.
Finally fmt can also be a function in x, which makes formatting very flexible.
New formats can be created by means of as.fmt(). This works quite straight on. We can use any of the arguments from Format() and combine them to a list.
The following code will define a new format template named "myNumFmt" of the class "fmt". Provided to Format() this will result in a number displayed with 2 fixed digits and a comma as big mark:
myNumFmt <- as.fmt(digits=2, big.mark=",") Format(12222.89345, fmt=myNumFmt) = 12,222.89
The latter returns the same result as if the arguments would have been supplied directly: Format(12222.89345, digits=2, big.mark=",").
Many report functions (e.g. TOne()) in DescTools use three default formats for counts (named "abs"), numeric values ("num") and percentages ("per"). These formats can be set by the user as options (see DescToolsOptions(). For other purposes any number of any named formats can be defined.
Fmt() is used to access and edit already defined Formats. It can directly adapt defined properties and returns the format template. Fmt("num", digits=1, sci=10) will use the current version of the numeric format and change the digits to 1 and the threshold to switch to scientifc presentation to numbers >1e10 and <1e-10.
Format templates can be altered using their names. With Fmt(abs=Fmt("abs", big.mark=" ")) the format template for count values "abs" will be overwritten with the new values and stored as option for the current session.
The formats can as well be organized as options. DescToolsOptions("fmt") would display the currently defined formats. This mechanic works analogously to the options() procedure of base R. So to store the current settings we can use
opt <- DescToolsOptions("fmt")
... do some stuff like redefining the global formats ...
DescToolOptions(opt)The last command resets the options and so we have again the initial definitions for the format templates.
the formatted values as characters.
If x was a matrix, then a the result will also be a matrix. (Hope this will not surprise you...)
Andri Signorell <andri@signorell.net>
Format(as.Date(c("2014-11-28", "2014-1-2")), fmt="ddd, d mmmm yyyy")
Format(as.Date(c("2014-11-28", "2014-1-2")), fmt="ddd, d mmmm yyyy", lang="engl")
x <- pi * 10^(-10:10)
Format(x, digits=3, fmt="%", sci=NA)
Format(x, digits=4, sci=c(4, 6), ldigits=0, width=9, align=".")
# format a matrix
m <- matrix(runif(100), nrow=10,
dimnames=list(LETTERS[1:10], LETTERS[1:10]))
Format(m, digits=1)
# engineering format
Format(x, fmt="eng", digits=2)
Format(x, fmt="engabb", ldigits=2, digits=2)
# combine with grams [g]
paste(Format(x, fmt="engabb", ldigits=2, digits=2), "g", sep="")
# example form symnum
pval <- rev(sort(c(outer(1:6, 10^-(1:3)))))
noquote(cbind(Format(pval, fmt="p"), Format(pval, fmt="*")))
# use Fmt() to get and define new formats stored as option
Fmt() # all defined formats
Fmt("abs") # only format named "abs"
Fmt("nexist") # only format named "nexist" (nonexisting)
Fmt("abs", "per", "nexist")
Fmt("abs", digits=3) # get Fmt("abs") and overwrite digits
Fmt("abs", na.form="-") # get Fmt("abs") and add user defined na.form
# define totally new format and store as option
Fmt(nob=as.fmt(digits=10, na.form="nodat"))
# overwrite an existing format
Fmt(nob=Fmt("nob", digits=5))
Fmt("nob")
# change the character to be used as the decimal point
opt <- options(OutDec=",")
Format(1200, digits=2, big.mark = ".")
options(opt)Please choose more modern alternatives, such as Google Chrome or Mozilla Firefox.