Become an expert in R — Interactive courses, Cheat Sheets, certificates and more!
Get Started for Free

lab.optimize

Optimize a Bivariate Graph Statistic Across a Set of Accessible Permutations


Description

lab.optimize is the front-end to a series of heuristic optimization routines (see below), all of which seek to maximize/minimize some bivariate graph statistic (e.g., graph correlation) across a set of vertex relabelings.

Usage

lab.optimize(d1, d2, FUN, exchange.list=0, seek="min", 
    opt.method=c("anneal", "exhaustive", "mc", "hillclimb", 
    "gumbel"), ...)
lab.optimize.anneal(d1, d2, FUN, exchange.list=0, seek="min", 
    prob.init=1, prob.decay=0.99, freeze.time=1000, 
    full.neighborhood=TRUE, ...)
lab.optimize.exhaustive(d1, d2, FUN, exchange.list=0, seek="min", ...)
lab.optimize.gumbel(d1, d2, FUN, exchange.list=0, seek="min", 
    draws=500, tol=1e-5, estimator="median", ...)
lab.optimize.hillclimb(d1, d2, FUN, exchange.list=0, seek="min", ...)
lab.optimize.mc(d1, d2, FUN, exchange.list=0, seek="min", 
    draws=1000, ...)

Arguments

d1

a single graph.

d2

another single graph.

FUN

a function taking two graphs as its first two arguments, and returning a numeric value.

exchange.list

information on which vertices are exchangeable (see below); this must be a single number, a vector of length n, or a nx2 matrix.

seek

"min" if the optimizer should seek a minimum, or "max" if a maximum should be sought.

opt.method

the particular optimization method to use.

prob.init

initial acceptance probability for a downhill move (lab.optimize.anneal only).

prob.decay

the decay (cooling) multiplier for the probability of accepting a downhill move (lab.optimize.anneal only).

freeze.time

number of iterations at which the annealer should be frozen (lab.optimize.anneal only).

full.neighborhood

should all moves in the binary-exchange neighborhood be evaluated at each iteration? (lab.optimize.anneal only).

tol

tolerance for estimation of gumbel distribution parameters (lab.optimize.gumbel only).

estimator

Gumbel distribution statistic to use as optimal value prediction; must be one of “mean”, “median”, or “mode” (lab.optimize.gumbel only).

draws

number of draws to take for gumbel and mc methods.

...

additional arguments to FUN.

Details

lab.optimize is the front-end to a family of routines for optimizing a bivariate graph statistic over a set of permissible relabelings (or equivalently, permutations). The accessible permutation set is determined by the exchange.list argument, which is dealt with in the following manner. First, exchange.list is expanded to fill an nx2 matrix. If exchange.list is a single number, this is trivially accomplished by replication; if exchange.list is a vector of length n, the matrix is formed by cbinding two copies together. If exchange.list is already an nx2 matrix, it is left as-is. Once the nx2 exchangeabiliy matrix has been formed, it is interpreted as follows: columns refer to graphs 1 and 2, respectively; rows refer to their corresponding vertices in the original adjacency matrices; and vertices are taken to be theoretically exchangeable iff their corresponding exchangeability matrix values are identical. To obtain an unlabeled graph statistic (the default), then, one could simply let exchange.list equal any single number. To obtain the labeled statistic, one would use the vector 1:n.

Assuming a non-degenerate set of accessible permutations/relabelings, optimization proceeds via the algorithm specified in opt.method. The optimization routines which are currently implemented use a variety of different techniques, each with certain advantages and disadvantages. A brief summary of each is as follows:

  1. exhaustive search (“exhaustive”): Under exhaustive search, the entire space of accessible permutations is combed for the global optimum. This guarantees a correct answer, but at a very high price: the set of all permutations grows with the factorial of the number of vertices, and even substantial exchangeability constraints are unlikely to keep the number of permutations from growing out of control. While exhaustive search is possible for small graphs, unlabeled structures of size approximately 10 or greater cannot be treated using this algorithm within a reasonable time frame.

    Approximate complexity: on the order of prod( |V_i|!, i in L ), where L is the set of exchangeability classes.

  2. hill climbing (“hillclimb”): The hill climbing algorithm employed here searches, at each iteration, the set of all permissible binary exchanges of vertices. If one or more exchanges are found which are superior to the current permutation, the best alternative is taken. If no superior alternative is found, then the algorithm terminates. As one would expect, this algorithm is guaranteed to terminate on a local optimum; unfortunately, however, it is quite prone to becoming “stuck” in suboptimal solutions. In general, hill climbing is not recommended for permutation search, but the method may prove useful in certain circumstances.

    Approximate complexity: on the order of |V(G)|^2 per iteration, total complexity dependent on the number of iterations.

  3. simulated annealing (“anneal”): The (fairly simple) annealing procedure here employed proceeds as follows. At each iteration, the set of all permissible binary exchanges (if full.neighborhood==TRUE) or a random selection from this set is evaluated. If a superior option is identified, the best of these is chosen. If no superior options are found, then the algorithm chooses randomly from the set of alternatives with probability equal to the current temperature, otherwise retaining its prior solution. After each iteration, the current temperature is reduced by a factor equal to prob.decay; the initial temperature is set by prob.init. When a number of iterations equal to freeze.time have been completed, the algorithm “freezes.” Once “frozen,” the annealer hillclimbs from its present location until no improvement is found, and terminates. At termination, the best permutation identified so far is utilized; this need not be the most recent position (though it sometimes is).

    Simulated annealing is sometimes called “noisy hill climbing” because it uses the introduction of random variation to a hill climbing routine to avoid convergence to local optima; it works well on reasonably correlated search spaces with well-defined solution neighborhoods, and is far more robust than hill climbing algorithms. As a general rule, simulated annealing is recommended here for most graphs up to size approximately 50. At this point, computational complexity begins to become a serious barrier, and alternative methods may be more practical.

    Approximate complexity: on the order of |V(G)|^2*freeze.time if full.neighborhood==TRUE, otherwise complexity scales approximately linearly with freeze.time. This can be misleading, however, since failing to search the full neighborhood generally requires that freeze.time be greatly increased.)

  4. blind monte carlo search (“mc”): Blind monte carlo search, as the name implies, consists of randomly drawing a sample of permutations from the accessible permutation set and selecting the best. Although this not such a bad option when A) a large fraction of points are optimal or nearly optimal and B) the search space is largely uncorrelated, these conditions do not seem to characterize most permutation search problems. Blind monte carlo search is not generally recommended, but it is provided as an option should it be desired (e.g., when it is absolutely necessary to control the number of permutations examined).

    Approximate complexity: linear in draws.

  5. extreme value estimation (“gumbel”): Extreme value estimation attempts to estimate a global optimum via stochastic modeling of the distribution of the graph statistic over the space of accessible permutations. The algorithm currently proceeds as follows. First, a random sample is taken from the accessible permutation set (as with monte carlo search, above). Next, this sample is used to fit an extreme value (gumbel) model; the gumbel distribution is the limiting distribution of the extreme values from samples under a continuous, unbounded distribution, and we use it here as an approximation. Having fit the model, an associated statistic (the mean, median, or mode as determined by estimator) is then used as an estimator of the global optimum.

    Obviously, this approach has certain drawbacks. First of all, our use of the gumbel model in particular assumes an unbounded, continuous underlying distribution, which may or may not be approximately true for any given problem. Secondly, the inherent non-robustness of extremal problems makes the fact that our prediction rests on a string of approximations rather worrisome: our idea of the shape of the underlying distribution could be distorted by a bad sample, our parameter estimation could be somewhat off, etc., any of which could have serious consequences for our extremal prediction. Finally, the prediction which is made by the extreme value model is nonconstructive, in the sense that no permutation need have been found by the algorithm which induces the predicted value. On the bright side, this could allow one to estimate the optimum without having to find it directly; on the dark side, this means that the reported optimum could be a numerical chimera.

    At this time, extreme value estimation should be considered experimental, and is not recommended for use on substantive problems. lab.optimize.gumbel is not guaranteed to work properly, or to produce intelligible results; this may eventually change in future revisions, or the routine may be scrapped altogether.

    Approximate complexity: linear in draws.

This list of algorithms is itself somewhat unstable: some additional techniques (canonical labeling and genetic algorithms, for instance) may be added, and some existing methods (e.g., extreme value estimation) may be modified or removed. Every attempt will be made to keep the command format as stable as possible for other routines (e.g., gscov, structdist) which depend on lab.optimize to do their heavy-lifting. In general, it is not expected that the end-user will call lab.optimize directly; instead, most end-user interaction with these routines will be via the structural distance/covariance functions which used them.

Value

The estimated global optimum of FUN over the set of relabelings permitted by exchange.list

Author(s)

Carter T. Butts buttsc@uci.edu

References

Butts, C.T. and Carley, K.M. (2005). “Some Simple Algorithms for Structural Comparison.” Computational and Mathematical Organization Theory, 11(4), 291-305.

Butts, C.T., and Carley, K.M. (2001). “Multivariate Methods for Interstructural Analysis.” CASOS Working Paper, Carnegie Mellon University.

See Also

Examples

#Generate a random graph and copy it
g<-rgraph(10)
g2<-rmperm(g)  #Permute the copy randomly

#Seek the maximum correlation
lab.optimize(g,g2,gcor,seek="max",opt.method="anneal",freeze.time=50,
    prob.decay=0.9)

#These two don't do so well...
lab.optimize(g,g2,gcor,seek="max",opt.method="hillclimb")     
lab.optimize(g,g2,gcor,seek="max",opt.method="mc",draws=1000)

sna

Tools for Social Network Analysis

v2.6
GPL (>= 2)
Authors
Carter T. Butts [aut, cre, cph]
Initial release
2020-10-5

We don't support your browser anymore

Please choose more modern alternatives, such as Google Chrome or Mozilla Firefox.